Service Hotline:0531-87221996
 中文  |  EnglishEspañol

联系我们

Jinan Glasino Machinery Co., Ltd

Manager: Luis Liu

Tel: 0086-531-87221996

Phone: 0086-15165139539

Email: glasino@126.com

Fax: 0086-531-87221996

Add: Mingliu Square, Changqing District Jinan City, Shandong Province


Automatic sandwich production line

所在位置:首页  > Product DisplayGlass tempered furnace seriesAutomatic sandwich production line

Automatic sandwich production line

更新时间:2019-08-26 点击数:278

Automatic sandwich production line includes turning over upper sheet, washing machine, positioning table, folding sheet, transition table, suction tray and walking mechanism, film rack, preheating section, press, heating section, press, turning down sheet, supporting facilities including autoclave, air compressor, air storage tank, dehumidifier, folding room, etc.

 

Product features:

1. Automatic control of production process, self-diagnosis function, simple and convenient operation, product parameters can be stored, and process parameters can be modified online.

2. The gluing sheet is automatic, fast, convenient and safe.Especially suitable for production of large - volume panel flat laminated glass.

3. the pressure roller spacing can be adjusted automatically according to needs, automatic constant pressure.

4. can produce 4-80mm thickness flat laminated glass and some large radius curved laminated glass.

5. All product specifications can be designed and manufactured according to customer requirements to fully meet customer needs.

 

Parameters of production line (excluding supporting facilities)

 

Model

Max size

(mm)

Total power

kW

Overall dimensions(L x W x H)mm

Note

 

AT-LA2536

2500x3600

128

29810x8000x4000

The width and height of the equipment include the laminating chamber

AT-LA2542

2500x4200

145

34310x8000x4000

AT-LA2550

2500x5000

166

39110x8000x4000

AT-LA2560

2500x5000

183

45110x8000x4000

AT-LA3042

3000x4200

175

34310x8000x4000

AT-LA3060

3000x6000

228

45110x8000x4000

 

Operation points:

1. It is absolutely forbidden to switch working mode in the glass tempering furnace during the production process, which may lead to serious working logic error, resulting in the loss of glass state, and the glass will remain in the furnace.

2. Glass tempering furnace should never use glass with a large length difference to work at multiple stations, which may cause the glass position in the furnace to be deranged, resulting in too large fluctuations in the position of the furnace, and the general size is controlled within the range of 50mm.If you choose a new specification, you must wait until all products of the previous specification are out of the oven before the next production.

3. During the maintenance of glass tempered furnace, the equipment must be put into the standby mode of the system, so that part of the equipment can be manually controlled, but the system will not automatically run the automatic continuous operation of the production process.

Toughened furnace

4. glass tempered furnace system maintenance must do a good job of safety protection, in important departments must be necessary when you can press the emergency stop button or cut off the power supply.

 

 


CONTACT US

联系我们