Jinan Glasino Machinery Co., Ltd
Manager: Luis Liu
Add: Mingliu Square, Changqing District Jinan City, Shandong Province
Products forced convection glass tempering furnace is divided into: the upper fan convection, heat up the circulation of hot air blower convection and forced convection toughened furnace principle: this series of products according to the principle of convection heating, the use of special design of the convection fan and original structure of hot air circulation, and adopts many advanced technologies, make glass surface heating accelerated dramatically, greatly increased the production efficiency and product quality, especially in the processing of low-e glass has incomparable advantage.
1. Adopt the whole convection mode, which is qualitatively different from the traditional structure of upper convection strengthened by adding balance pipes. In other words, the mixed heating mode of convection and radiation is qualitatively different, which fundamentally solves a series of heating problems caused by different radiances on the upper and lower surfaces of low-e glass;
2. More heating zones are set in the wide direction of the furnace, and each heating zone is controlled separately, which can flexibly form various heating curves;
3. According to the furnace length, a reasonable number of convection units can independently control the convection intensity.The convection fan placed on the upper part of the convection box is conducive to the balance of air flow pressure in the furnace, supplemented by the jet nozzle and flow diversion device in the furnace, so that the distribution of hot air flow pressure is more uniform.
4. through the internal optimization algorithm and PID temperature module, database of computer fuzzy control combined with the circulation fan frequency conversion control, custom variable frequency curve, according to the process parameters such as heating, constant temperature, heat preservation, regulation at any position of the working state of the heater and fan and area of temperature distribution and heat flow intensity, realize the whole furnace temperature, more heat, local temperature controlling complicated process requirements;
5. through the adjustment of convection parameters, can make the lower temperature of the furnace set lower, so the glass is not easy to appear white fog, pitting and other heating defects.Meanwhile, the improvement of heating efficiency shortens the heating time, and on the basis of the improvement of product quality, the production efficiency is also greatly improved.
Toughened glass type
2, online low-e glass
3. Ultra-white glass
4. Screen printed glass
5. Embossed glass
6. Stained glass
7. white glass
Max loading size
Note: 1. The data in the table are calculated according to 5 mm white glass and 100% loading rate;The actual data varies with the glass varieties, specifications and loading conditions, and shall be subject to the agreement of the parties.
2. Other models are not listed in full
3. The company reserves the right to change relevant parameters after technical update
At-taq glass tempered furnace is mainly used for processing glass products in building, furniture, home appliances, decoration, automobile and other industries.
1. The forced convection tempering furnace must not switch working mode in the production process, which may lead to serious logic errors, resulting in the loss of the glass state, and the glass will remain in the furnace.
2. The forced convection tempering furnace must not use the glass with a large length difference to work at multiple stations, which may cause the glass position in the furnace to be deranged, resulting in too large fluctuations in the position of the furnace, and the general size is controlled within the range of 50mm.If you choose a new specification, you must wait until all products of the previous specification are out of the oven before the next production.
3. The equipment must be put into the system standby mode when the forced convection tempering furnace is undergoing maintenance, so that part of the equipment can be manually controlled, but the system will not automatically run the automatic continuous operation of the production process.
4. the forced convection furnace system maintenance must do a good job of safety protection, in important departments must be necessary when you can press the emergency stop button or cut off the power supply.
Manager: Luis Liu