Jinan Glasino Machinery Co., Ltd
Manager: Luis Liu
Add: Mingliu Square, Changqing District Jinan City, Shandong Province
1. several times the length of the furnace and the wind grid of the conventional equipment, can make the glass be heated to the temperable temperature in one-way movement, and be tempered and cooled quickly;
2. flexible speed curve regulation, adapt to the physical state of glass at different periods;According to different specifications of glass, the continuous production mode of logical servo control and pure continuous production mode can be set.
3. During the production process, the fan works continuously and effectively, with obvious energy-saving effect;
4. Heating and cooling process does not need reciprocating swing, which can significantly reduce quality defects such as white fog, scratches and waves;
5. continuous steel process, double production, suitable for processing large quantities of building furniture, home appliances, automobiles, solar energy and other industries glass.
Toughened glass type
2. online low-e glass
3. Ultra-white glass
4. Screen printed glass
5. Embossed glass
6. Stained glass
7. white glass
Max loading size
Note: 1. The data in the table are calculated according to 5 mm white glass and 100% loading rate;The actual data varies with the glass varieties, specifications and loading conditions.
2. Other models are not listed in full
3. The company reserves the right to change relevant parameters after technical update
1. Continuous glass tempering furnace must not switch working mode in the production process, which may lead to serious logic error, resulting in the loss of glass state, glass continued in the furnace does not come out.
2. Continuous glass tempering furnace must not use the glass with a large length difference to work at multiple stations, which may cause the glass position in the furnace to be deranged, resulting in too large fluctuations in the position of the furnace, and the general size is controlled within the range of 50mm.If you choose a new specification, you must wait until all products of the previous specification are out of the oven before the next production.
3. During the maintenance of continuous glass tempered furnace, the equipment must be put into the standby mode of the system, so that part of the equipment can be manually controlled, but the system will not automatically run the automatic continuous operation of the production process.
4. continuous glass tempered furnace system maintenance must do a good job of safety protection, in important departments must be necessary when you can press the emergency stop button or cut off the power supply.
Manager: Luis Liu