Service Hotline:0531-87221996
 中文  |  EnglishEspañol

联系我们

Jinan Glasino Machinery Co., Ltd

Manager: Luis Liu

Tel: 0086-531-87221996

Phone: 0086-15165139539

Email: glasino@126.com

Fax: 0086-531-87221996

Add: Mingliu Square, Changqing District Jinan City, Shandong Province


Flat bend furnace

更新时间:2019-08-26 点击数:289

Advantages

1. Man-machine operation interface of intelligent control system

2. temperature control template accurate fine response speed fast inhibition rate is very high

3. The furnace door adopts the advanced guillotine type up and down design

4. high resistance deformation open and close freely

5. The synchronous o-belt is designed with two grooves

6. The heating section is more stable in reciprocating and online replacement is efficient and convenient

 

Toughened glass type

1. Ultra-white glass

2. Screen printed glass

3. Embossed glass

4. Tinted glass

5. white glass

 

Main parameters

Model

Max loading size

(mm)

Min size

(mm)

Thickness

(mm)

Output

(m²/h)

Installed capacity

(KVA)

AT-TA1225

1250×2500

100×250

3-19

53

200

AT-TA1636

1600×3660

100×250

3-19

91

400

AT-TA2036

2000×3660

100×250

4-19

126

500

AT-TA2436

2440×3660

100×300

4-25

152

630

AT-TA2442

2440×4200

100×300

4-25

173

630

AT-TA2450

2440×5000

100×300

4-25

202

800

AT-TA2460

2440×6000

100×300

4-25

245

1000

AT-TA2842

2850×4200

200×350

5-25

213

800

AT-TA2850

2850×5000

200×350

5-25

247

1000

AT-TA2860

2850×6000

200×350

5-25

301

1000

AT-TA3050

3000×5000

200×400

5-25

267

1000

AT-TA3060

3000×6000

200×400

5-25

321

1250

AT-TA3350

3300×5000

200×400

5-25

300

1000

AT-TA3360

3300×6000

200×400

5-25

352

1250

 

Note: 1. The data in the table are calculated according to 5 mm white glass and 100% loading rate;The actual data varies with the glass varieties, specifications and loading conditions.

2. Other models are not listed in full

3. The company reserves the right to change relevant parameters after technical update

At-ta type glass tempered furnace is mainly used for processing glass products in building, furniture, home appliances, decoration, automobile and other industries.

At-ta type glass tempered furnace unit main production data sheet

 

Bow bend

Ordinary white glass

4-6mm 1.0‰

8-19mm 0.8‰

Wave bend

Ordinary white glass

4-6mm 0.2mm/300mm

8-19mm 0.15mm/300mm

Wind Spot

Under natural light, wind spots will not be visible if the observation distance is not less than 1000mm, the observation Angle is not less than 15°, and the thickness of the glass lamination is not more than 30mm or the thickness of the single glass is not more than 19mm.

 

Operating points

1. It is absolutely forbidden to switch working mode in the flat-bending tempered furnace during the production process, which may lead to serious logic errors, resulting in the loss of glass state, and the glass will remain in the furnace.

2. flat bending furnace can never use the length of the glass to work at multiple stations, this may lead to the glass position in the furnace confusion, resulting in too large fluctuations in the position of the furnace, the general size control in the range of 50mm.If you choose a new specification, you must wait until all products of the previous specification are out of the oven before the next production.

3. During the maintenance of flat bend steel furnace, the equipment must be put into the standby mode of the system, so that part of the equipment can be manually controlled, but the system will not automatically run the automatic continuous operation of the production process.

Toughened furnace

4. flat bend furnace system maintenance must do a good job of safety protection, in important departments must be necessary when you can press the emergency stop button or cut off the power supply.

 


CONTACT US

联系我们