Service Hotline:0531-87221996
 中文  |  EnglishEspañol

联系我们

Jinan Glasino Machinery Co., Ltd

Manager: Luis Liu

Tel: 0086-531-87221996

Phone: 0086-15165139539

Email: glasino@126.com

Fax: 0086-531-87221996

Add: Mingliu Square, Changqing District Jinan City, Shandong Province


Shaped bending furnace

所在位置:首页  > Product DisplayGlass tempered furnace seriesShaped bending furnace

Shaped bending furnace

更新时间:2019-08-26 点击数:246

Advantages

1. Multi-station design, high production efficiency and very low energy consumption

2. Adopt segmenting arc regulating mechanism, with high anastomosis and accurate radian

3. The control system is stable and reliable, and the glass quality is excellent

4. New arc forming method and flexible arc changing mechanism, not only arc is flexible and changeable, but also easy to adjust arc;Meanwhile, high-precision arc changing mechanism is adopted to ensure the accuracy and stability of arc forming.

5. Separate design of toughening and cooling sections. During the tempering and cooling process, no arc changing action can be made in the bending forming section and the toughening section to ensure the precision and high repeatability of the curved glass.

 

Main parameters

 

Model

Max loading size

(mm)

Min size

(mm)

Thickness

(mm)

Min radius(mm)

Output

(L/h)

Installed capacity

(KVA)

AT-TE1210

1200×1000

 

 

400×400

 

 

 

4-8

 

 

 

280

 

 

 

 

31-33

400

AT-TE1510

1500×1000

500

AT-TE1810

1800×1000

500

AT-TE2010

2000×1000

630

AT-TE2210

2200×1000

630

 

Note: 1. The data in the table are calculated according to 5 mm white glass and 100% loading rate;The actual data varies with the glass varieties, specifications and loading conditions.

2. Other models are not listed in full

3. The company reserves the right to change relevant parameters after technical update

At-te type glass tempered furnace is mainly used for processing automobile glass products such as bus, car, agricultural vehicle, electric vehicle and so on, as well as home appliances, furniture, decoration, shower room and so on.

 

Operating points

1. It is absolutely not allowed to switch working mode in the process of production of special-shaped bending tempered furnace, which may lead to serious working logic error, resulting in the loss of glass state, and glass will not come out in the furnace continuously.

2, special-shaped bending furnace can never use the length difference of the glass to work in the multi-station, this may lead to the glass position in the furnace confusion, resulting in a big fluctuation in the position of the furnace, the general size control in the range of 50mm.If you choose a new specification, you must wait until all products of the previous specification are out of the oven before the next production.

3. The equipment must be put into the standby mode of the system during the overhaul of the special-shaped bending tempered furnace, so that part of the equipment can be manually controlled, but the system will not automatically run the automatic continuous operation of the production process.

4. special-shaped bending furnace system maintenance must do a good job of safety protection, in important departments must be necessary when you can press the emergency stop button or cut off the power supply.

 


CONTACT US

联系我们